D-Link DSL-2542B User Manual Download Page 10 | Manualshive

Page: 10 / 59

background image

Section 2 – Installation

D-Link DSL-2542B User Manual

10

VPI

Most users will not be required to change this setting. The Virtual Path Identifier (VPI) is used in conjunction with the Virtual Channel Identifier (VCI)
to identify the data path between your ADSL service provider’s network and your computer. If you are setting up the Router for multiple virtual
connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can
be changed in the WAN Settings window of the web management interface.

VCI

Most users will not be required to change this setting. The Virtual Channel Identifier (VCI) used in conjunction with the VPI to identify the data path
between your ADSL service provider’s network and your computer. If you are setting up the Router for multiple virtual connections, you will need to
configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN
Settings window of the web management interface.

Information you will need about DSL-2542B

Username

This is the Username needed access the Router’s management interface. When you attempt to connect to the device through a web browser you
will be prompted to enter this Username. The default Username for the Router is “admin.” The user cannot change this.

Password

This is the Password you will be prompted to enter when you access the Router’s management interface. The default Password is “admin.” The
user may change this.

LAN IP addresses for the DSL-2542B

This is the IP address you will enter into the Address field of your web browser to access the Router’s configuration graphical user interface (GUI)
using a web browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will
be the base IP address used for DHCP service on the LAN when DHCP is enabled.

LAN Subnet Mask for the DSL-2542B

This is the subnet mask used by the DSL-2542B, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be
changed later.

«
...
8
9
10
11
12
...
»

Summary of Contents for DSL-2542B




























































Reviews:

No comments

Related manuals for DSL-2542B

Brand: CELOT Pages: 34

Brand: MSNswitch Pages: 2

Brand: ADTRAN Pages: 20

DGN2200M - Wireless-N 300 Router

Brand: NETGEAR Pages: 95

DP1.2-Vision-IP-Fiber

Brand: G&D Pages: 240

Brand: Kasda Pages: 44

Brand: LevelOne Pages: 10

NVR52A16-16P-4KS2

Brand: Dahua Technology Pages: 13

Brand: Edimax Pages: 161

Brand: Quamtum Pages: 42

ICPE2600 Series

Brand: 3onedata Pages: 5

Brand: MikroTik Pages: 7

Brand: Canon Pages: 8

Brand: Canon Pages: 11

PIXMA MP495 Series

Brand: Canon Pages: 24

Brand: Canon Pages: 288

Brand: Canon Pages: 2

Brand: AVM Pages: 196

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands