Section 3 – Web Configuration
26
Adding a PVC in
PPPoE
mode, do as follow:
Step 1
Choose the channel type
ATM
or
PTM
Step 2
Input VPI/VCP value and select Encapsulation mode provided by your
ISP. The VPI/VCP value of the new PVC must be different from the
PVCs which exist in
Current ATM VC Table
.
Step 3
Set the channel mode to
PPPoE
.
Step 4
Enter the
User name
and
password
of PPPoE account provided by
your ISP.
Step 5
Choose a connection type from the Type drop-down list. There are 3
connection types available:
Continuous
,
Connect On Demand
,
Manual
.
Continuous: The system automatically keeps dialing for WAN
connection once the connection is off-line.
Connect On Demand: The system automatically dials for WAN
connection once network access request is detected. If no request is
sent from the LAN within the IdleTime, the system automatically
disconnect from the internet. You can set the Idle Time as you need.
Manual: Manually dial to connect the WAN once powering on the
Router.
Step 6
After setting, click
Add
to add the new PVC in PPPoE mode in Current
ATM VC Table.