Section 3 – Web Configuration
36
Choose
SETUP
>
Wireless Setup
>
Wireless Security
. The page shown as the
figure appears on the right. The page shows how to set WPS.
There are 3 methods to realize wireless connection through WPS.
-
PBC
Click the
Start
PBC
button in this page. And then click WPS button on the client to
be connected within 2 minutes. The connection will be established.
-
Based on the PIN of 224.
1) Do not select
Disable WPS
.
2) Click
Start PIN
button beside
Pin Configuration
.
3) Input the Device PIN (a random code displayed in this page) in the WPS
application interface of the client to be connected. And then click
PIN
on the
client.
4) After setting, click
Apply Changes
.
Note:
If you want to change the PIN, click
Regenerate PIN
button in this page.
The wireless SSID must select
d-link.
-
Based on the PIN of the client to be connected.
1) Do not select
Disable WPS
.
2) Find the PIN of the client to be connected. Input this PIN in the
Client PIN
Number
in this page. And then click
Start PIN
button below.