Section 3 – Web Configuration
24
DHCP Server
Choose
SETUP
>
Local Network
>
DHCP Server
. This page allows you to
configure the DHCP server.
There are 3 types of DHCP Modes:
DHCP Server
,
DHCP Relay
, and
None
.
To configure the DHCP Server, do as follow:
-
DHCP Server
DHCP Server
: If you are using 224 as a DHCP server, select
DHCP Server
. The
224 will assign IP address to the hosts connected to the 224.
Step 1
Select
DHCP Server
from the DHCP Mode.
Step 2
Select interfaces using the DHCP Mode set in
Step 1
.
Step 3
Set the
IP pool range
. It specifies the first IP address in the IP address
pool. The router assigns IP address that base on the IP pool range to
the host. You can keep it as defaults.
Step 4
Set the
default gateway
. You can keep it as defaults:
10.0.0.2
.
Step 5
Set the
Max lease time
. The lease time determines the period that the
host retains the assigned IP addresses before the IP addresses
change.
Step 6
Set the Domain Name and DNS Servers. You can keep it as defaults.
Step 7
After setting, click
Apply Changes
to save the settings.
-
DHCP Relay
DHCP Relay
: If you are using the other DHCP server to assign IP address to
your hosts on the LAN, enable the
DHCP Relay
. You can set the DHCP server IP
address. The DHCP Relay enables the message to transmit between clients in
different network segment.
Step 1
Select
DHCP Relay
from the DHCP Mode.
Step 2
Set the
Relay Server
. You can keep it as defaults.
Step 3
After setting, click
Apply Changes
to save the settings.
