D-Link DSA 5100 - Airspot - Gateway Manual Download

Page: 45 / 93

Using the Configuration Utility (continued)

Group Profile > Firewall Profile>Edit Filter Rule (continued)

MAC address of the Network component sending the request.

Source MAC:

Source (Destination) IP Address:

Source (Destination) Interface includes 4 interfaces: WAN1, WAN2, Public LAN, and
Private LAN. Select ALL to apply to all four interfaces.

Source (Destination) Interface:

Subnet Mask of the Network component sending (receiving) the request.

Source (Destination) Subnet Mask:

IP address of the Network component sending (receiving) the request.

Source (Destination) Operator:

Provides the comparison rules: =(Equal), != (Not Equal), >(Larger Than), and <(Less
Than).

Source (Destination) Start Port:

Start Port of the Network component sending (receiving) the request.

Source (Destination) End Port:

End Port of the Network component sending (receiving) the request.

Summary of Contents for DSA 5100 - Airspot - Gateway






























































































Search results

Summary of Contents for DSA 5100 - Airspot - Gateway

Reviews:

Related manuals for DSA 5100 - Airspot - Gateway

Brands by name

Popular brands

D-Link DSA 5100 - Airspot - Gateway, Manual

Search results

Summary of Contents for DSA 5100 - Airspot - Gateway

Reviews:

Related manuals for DSA 5100 - Airspot - Gateway

Brands by name

Popular brands