DSA-3110 Hotspot Edition – User Manual
•
Enter the parameters for the group.
Group Name
A name of the group (tariff). It is recommended to specify meaningful
group names to avoid confusion when there have been created a large
number of groups.
Measure
A unit of measurement for the tariff. The values are:
MIN
(minute),
HOUR
,
KB
(kilobyte),
MB
(megabyte).Therefore, in this drop-down
list you select not only the unit of measurement, but also the type of the
group (time-based – when the
MIN
or
HOUR
value is selected, or
traffic-based –
when the
КB
or
MB
value is
selected).
Price
A price per unit (of time or traffic) for this group (tariff) in a
conventional currency unit (USD, RUB, EUR, etc.).
Group band,
kBytes/sec
A bandwidth allocated for the
whole
group (the maximum rate in KBps
for all group users in total, which can be used to transfer data to the
users through the device). If the value ‘
0
’ has been specified for the
field, then the bandwidth is not limited and regarded as the maximum
rate of the device (
90 MBps=11520 KBps
).
User band,
Kbytes/sec
A bandwidth allocated for
each
user of the group (the maximum rate in
KBps for
one
user of the group, which can be used to transfer data to
the users through the device). If the value ‘
0
’ has been specified for the
field, then the bandwidth is not limited and regarded as the maximum
rate of the device (
90 MBps=11520 KBps
).
Quota
A preset quota for users of this group (the number of time or traffic
units, which can be paid for and used at once upon creating a user).
Account length
A time period during which
each
user of
this
group can exist in the
system (from the moment of creation). Options are
unlimited
(the time
period for the account is not limited) and
manual
(the time period from
the moment of creation is specified in days, hours, and minutes.
Upon the expiration of the specified period:
•
Users created by the cheque printer are removed from the
system automatically (even if the account balance is positive).
•
Users created in the local DB manually are blocked (switched to
the END_OF_ACCOUNT state). The user will still exist in the system,
but the access for this user will be closed.
•
Click the
Add
button.
Attention!
1.
The total number of users in each group is not limited.
Therefore,
if the summary
bandwidth of all users
from the group that work simultaneously
exceeds the group
bandwidth
, then the latter
is shared equally for all users that work at the moment
. (For
example, if the bandwidth of a group equals 100 KBps, and the bandwidth of its users is 50
KBps, then for 2 or less users the bandwidth equals to 50 KBps, for 3 users – 100/3=33.3
KBps, for 4 users –100/4=25 KBps, etc.)
Page 33 of 61
