DSA-3110 Hotspot Edition – User Manual
In the unprivileged mode, the IP address of the device’s LAN interfaces is used to access the web-
based interface of the device.
Unprivileged users cannot change the settings of the device and are able to view statistics on their
accounts only (the same fields as on the
Groups and Users > Active users
page are displayed).
The
Refresh
button is used to refresh the account statistics. Note that the statistics is refreshed at
most once per minute.
Picture 42. The user statistics page.
Attention!
A public user can close the statistics page right after entering the data for authentication
over HTTP. This does not cause immediate termination of access to the global network through the
device.
To suspend public access (e.g., access to the Internet), you
must
click the
Logout
button located at
the bottom of the user statistics page. Time and traffic are accounted until the button is clicked.
Note: If a user has been inactive for 250 seconds, this user is automatically logged out and public
access for this user is blocked. Inactivity is considered to be the absence of data (0 byte)
transmitted through the device. In this situation, you should re-enter the authentication data to
resume public access.
For users registered in the centralized RADIUS DB, the period of inactivity equals to the Idle-
Timeout parameter transmitted in RADIUS packets.
The value for the period of inactivity equals to the relevant value for local database (250 seconds)
only when RADIUS packets do not contain the Idle-Timeout parameter.
Page 40 of 61
