26
Using Media Gateway Control Protocol (MGCP)
General Configuration
Logout
When the Logout link is clicked, the
You have been successfully logged out
page is displayed and the current configuration session is terminated.
Note: This page may also be displayed if you provided the wrong username
and/or password or if your session has been inactive for more than 10 minutes.
If you are having an active session with the server, any other user accessing the
MGCP phone’s configuration will get the
Server Busy page
and will not be al-
lowed access
.
Using the MGCP Phone
If the MGCP phone is configured properly and if the support infrastructure is in
place, the MGCP phone will play the dial tone on off-hook. You can dial any
registered MGCP number by entering the number in sequence; the end of the
number will be automatically detected by using the following two methods:
Using “Digit map” algorithm with the digit map supplied by the Call Agent.
Inter digit time out (2 seconds).
