D-Link DPH-80 Manual Download Page 92

Page: 92 / 101

Configuration Upload and Download

Example: If the tftp server is running in the machine 10.47.60.252 and the down-
load filename is dnld (it should appear as dnld.txt in the tftp server PC), then the
TFTP Configuration fields should be entered as follows:

Configuration Download

Download Procedure

Configure the DPH-80 with the above-required parameters.

Run the tftp server on the computer (Ex: 10.47.60.252 as above), to which
you want to download the configurations.

Initiate the configuration download by clicking on the

Configuration

Download

link in the main page, followed by a click on the

Yes

link in the

warning page to confirm downloading.

Upon successful download the DPH-80 system will reboot with the new
downloaded configuration.

Summary of Contents for DPH-80






































































































Search results

Summary of Contents for DPH-80

Reviews:

Related manuals for DPH-80

Brands by name

Popular brands

D-Link DPH-80, Manual

Search results

Summary of Contents for DPH-80

Reviews:

Related manuals for DPH-80

Brands by name

Popular brands