36
Using Session Initiated Protocol (SIP)
Configuring the SIP Phone
Once you have the above infrastructure in place, you can power up the SIP
phone. The SIP phone will play a
call progress tone
and try to register with the
SIP proxy server. This operation will fail since the SIP phone is not configured
properly and it will play
error tone
. However, the SIP phone is accessible through
an Internet browser for configuration.
The SIP phone IP address is required to access the phone through a browser.
The SIP phone uses factory default values before configuration and the default
IP address is 10.1.1.80 (net mask 255.0.0.0). However, the user can enter an
IP address through the keypad immediately after a factory reset as per the
format *x*y*z*a*#, where the symbols * and # are mandatory.
To access the web interface for the D-Link DPH-80:
Use a JavaScript-enabled Internet browser (Netscape 6.2 or above, IE 5.0 or
above) with the default IP address of the DPH-80 entered in the address box
(http://10.1.1.80).
The following page will appear.
Login Page to IP Phone
