In order to accomplish a Factory Reset of the DPH-300, it is necessary to do the
following:
1) Remove the handset from the base station.
2) Place the base station face-down on a flat surface (such as a table or
desk top).
3) Insert a bent paperclip or a toothpick in the hole for the Factory Reset
Button (see the photo on page 7 for the button’s location), and hold the
button down.
4) While still holding the button down, unplug the power adapter.
5) Wait 10 seconds, then reconnect the power adapter without letting go of
the Factory Reset Button.
6) Once you have restored power, continue holding the Factory Reset
Button down for another 10 seconds.
7)
Complete!
The DPH-300 should have had the following factory default
settings restored: IP Address; Call Logs (all).
8)
Note
that if your DPH
-
300 is still connected to the Internet, the auto-
provisioning process should repeat itself after the factory reset, and the
phone should return to a ready-state showing “D-Link” in the handset
display and allowing IP calling.
If you need to reset the
handset
to its original factory default settings, see page
19,
HS Setting > Set Default.
Factory Reset
Hardware Overview
DPH-300 User’s Manual
10
D-Link Corporation
