D-Link DP-692 User Manual Download Page 56

Page: 56 / 94

Internet Server User’s Guide

Configuration Settings

Modem AT Commands

Options (sub-

settings

♦

Init. String:

<AT&F> (default)

♦

Dial Prefix String:

<ATDT> (default)

♦

Hang-up String:

<~~~+++~~~ATH0> (default)

Description:

Modem AT commands are used to configure

and operate the modem when it is necessary to control set-
tings such as the speaker volume, line modulation, or
handshaking protocol.

Note:

See your modem user’s guide for information
about initialization string settings and other
modem commands.

Note that the initialization string modem must set the following:

Fixed baud rate (i.e., serial data rate adjustment dis-
abled).

Data Carrier Detect (DCD) to follow carrier signal
status.

Data Set Ready (DSR) to on while the modem is on.

Data Terminal Ready (DTR) to off to hang-up.

Enable RTS/CTS flow control.

Summary of Contents for DP-692































































































Search results

Summary of Contents for DP-692

Reviews:

Related manuals for DP-692

Brands by name

Popular brands

D-Link DP-692, User Manual

Search results

Summary of Contents for DP-692

Reviews:

Related manuals for DP-692

Brands by name

Popular brands