D-Link DNS-323 - Network Storage Enclosure NAS Server Page 96 User Manual Download

Page: 96 / 99

D-Link DNS-323 User Manual

Section 3 - Configuration

Storing non-English Character Files

If you are using firmware 1.04 or higher, then by default the DNS-323 will support Unicode, which is an industry

standard allowing computers to consistently represent and manipulate text expressed in most of the world’s writing

formats. However, if you were using an earlier version (firmware 1.03 or earlier) and have just upgraded to 1.04 or

higher, Unicode will not be supported until you have reformatted the hard drives in your DNS-323. If you wish to store

non-English character files, but do not want to reformat your hard drives, you will need to change the Language setting

of the device to ensure compatibility with those files.

Follow the Easy Search Utility steps below to change the language of your device if you have chosen to not reformat

your hard drives.

Insert the DNS-323 CD into your CD-ROM drive.

Click

Easy Search Utility

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server




































































































Search results

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server

Reviews:

Related manuals for DNS-323 - Network Storage Enclosure NAS Server

Brands by name

Popular brands

D-Link DNS-323 - Network Storage Enclosure NAS Server, User Manual

Search results

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server

Reviews:

Related manuals for DNS-323 - Network Storage Enclosure NAS Server

Brands by name

Popular brands