background image

5

D-Link DNS-323 User Manual

Section 1 - Product Overview

The D-Link DNS-323 ShareCenter™ 2-Bay Network Storage shares your documents, photos, music, and videos across 

the network and on the Internet (via FTP server) so family members, friends, or employees can access them. This 

enclosure, which can hold two 3.5” SATA hard drives of any capacity

1

, creates a central network point for backing up 

valuable files. The built-in RAID 1

2

 mirroring technology protects these files from drive failure. Other options such as 

Standard, JBOD, and RAID 0 are also available.

The DNS-323 shares files over the Internet via the built-in FTP server. Users and groups can be created and assigned 

to folders with either read or read/write permissions. Quotas can be set per user or group to restrict space usage. 

In addition, the DNS-323 can be used to stream photos, music, and videos to UPnP AV compatible network media 

players

3

The included CD contains D-Link’s Easy Search Utility. This utility allows you to locate the DNS-323 on the network 

and map drives to your computer. Backup software is also included on the CD. This software allows you to back up 

your files from a computer to the DNS-323 manually, by a schedule, as well as to recover your computer.

Combining ease of use with practical and high performance features, the DNS-323 is an organized solution for any 

network. Free up drive space on computers and centralize data on your network with the DNS-323 ShareCenter™!

Introduction

3

 D-Link cannot guarantee full compatibility or proper playback with all codecs. Playback capability depends on the codec support of the UPnP™ AV media player.

2

 RAID 1 mirroring requires the use of 2 internal SATA drives.

1

 Hard Drive(s) not included. 

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server




































































































Reviews: