1 General
1.1 General product information
1.2 Cable types
1.3 Symbols of this guide
2 Tools Required
3 Part List
4 Supplementary kit
5 Installation splitter/point to point module
5.1 Slide in module
5.2 Connect connectors to DLX adapters
5.3 Connect connectors to full size
hardened
adapters
5.4 Bring fibers to the organizer
5.5 Close protection cover
6 Cable preparation
6.1 Loop capacity
6.2 Cable retention (TENIO CTU)
6.3 Insert feeder loop to storage area
6.4 Gel containment
6.5 Securing cable
6.6 Install tube guidance
7 Splice feeder to splitter/point to point
module
7.1 Organizer
7.2 End cut
7.3 Mid cut
8 Branch cable
8.1 Prepare cable
8.2 Connect branch cable to feeder cable
9 Close the closure
10 Mounting the closure
10.1 Wall mounting
10.2 Pole mounting
Content
1 General
1.1
General Product Information
CommScope’s Mini-OTE 200 closure is a gel sealed fiber optic enclosure designed for splicing, termination and pass-through cable requirements in
fiber-to-the-X (FFTx) architectures.
The closure is available in 4,6, and 8 port versions DLX and 4 and 6 port versions full size hardened adapters; the housing is available in 2 colors,
black and gray.
The terminal is designed for use in wall, pole or handhole applications.
The closure has a maximum capacity of 24 splices, 2 trays of 12 splices each and contains an additional tray for fiber storage. The terminal housing
provides loop storage for microsheath or loose tube cable.
The Mini-OTE 200 allows for butt configurations with 4 wrap-around ports for multiple combinations of looped feeder cable (Ø 4 - 15 mm) and
branch-off cable (Ø 4 - 9 mm) where the feeder cables are positioned at the outside ports and the branch-off cables at the inside ports. TENIO
cable attachment is included as well as an external cable fixation integrated on the housing to absorb external forces on the cable.
1.2
Cable types
The Mini-OTE 200 is designed for microsheath or loose tube cables with an outside diameter up to 15 mm, and flat cable:
Feeder cable
Ø 4 -15 mm
Branch off cable
Ø 4 - 9 mm and flat (4.5x8.1 mm)
Fiber types include single fiber 250micron.
1.3
Symbols for this guide
Note
Presents useful information related to Installation Guide contents, the references and data related to the product’s use, etc.
i
Caution
Describes situations where data loss and incorrect product operation may occur, and provides proper actions to take in these
situations.
!
Warning
Describes a situation where product damage and user injury may occur, and provides proper actions to take in these situations.
Mini-OTE 200
I N S T A L L A T I O N I N S T R U C T I O N
Mini-OTE 200
TC-1334-IP
Rev A, Mar 2017
www.commscope.com
