D-Link DNS-323 - Network Storage Enclosure NAS Server Page 8 User Manual Download

Page: 8 / 99

D-Link DNS-323 User Manual

Section 1 - Product Overview

Power Receptacle:

The 12V 3A / 5V 3A power supply connects here.

Ethernet Port:

A Gigabit Ethernet port that connects the DNS-323 to a network.

USB Port:

Connect a printer, or UPS to the port. This USB port also supports D-Link SharePort™ technology. Refer to the SharePort™ manual for

more detail.

Drive Eject Lever:

Use the levers to eject the hard drives. The front panel must be removed before ejecting the drives.

Reset Button:

A pinhole button located beside the Ethernet socket is used to reset the DNS-323 to the factory default settings

Note:

After

resetting the unit’s configuration you will still have access to the data on your hard drive(s).

Rear Panel (Connections)

Ethernet Port

Power Receptacle

USB Port

Drive Eject Lever

Reset Button

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server




































































































Search results

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server

Reviews:

Related manuals for DNS-323 - Network Storage Enclosure NAS Server

Brands by name

Popular brands

D-Link DNS-323 - Network Storage Enclosure NAS Server, User Manual

Search results

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server

Reviews:

Related manuals for DNS-323 - Network Storage Enclosure NAS Server

Brands by name

Popular brands