D-Link DNS-323 - Network Storage Enclosure NAS Server User Manual Download

Page: 88 / 99

D-Link DNS-323 User Manual

Section 3 - Configuration

UPS Monitoring

The DNS-323 supports a battery backup, or uninterruptible power supply (UPS). Connect a UPS to the USB port on

the back of the DNS-323. You will see the UPS listed on the Device Information window (

Status

Device Info

) under

UPS Info.

To add an uninterruptible power supply, carry out the following

steps:

1. Turn off the DNS-323 if it is not already powered down.

2. Connect the UPS to the USB port on the back of the DNS-323.

3. Connect the power of the DNS-323 to the UPS.

4. Turn on the UPS.

5. Turn on the DNS-323.

6. Verify if the UPS is properly connected and powered on by

going to the Device Information window (pictured on the right)

and confirming if the UPS is listed in the UPS Info section.

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server




































































































Search results

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server

Reviews:

Related manuals for DNS-323 - Network Storage Enclosure NAS Server

Brands by name

Popular brands

D-Link DNS-323 - Network Storage Enclosure NAS Server, User Manual

Search results

Summary of Contents for DNS-323 - Network Storage Enclosure NAS Server

Reviews:

Related manuals for DNS-323 - Network Storage Enclosure NAS Server

Brands by name

Popular brands