D-Link DIR-815 Page 205 User Manual Download

Page: 205 / 240

DIR-815

AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

Parameter

Description

Ports

Destination port

A port of the destination IP address. You can specify one port,
several ports separated by a comma, or a range of ports separated by
a colon.

Set source port

manually

Move the switch to the right to specify a port of the source IP
address manually. Upon that the

Source port

field is displayed.

Source port

A port of the source IP address. You can specify one port, several
ports separated by a comma, or a range of ports separated by a colon.

Click the

APPLY

button.

To edit a rule for IP filtering, select the relevant line in the table. On the opened page, change the
needed parameters and click the

APPLY

button.

To remove a rule, select the checkbox located to the left of the relevant line of the table and click

the

DELETE

button (

). Also you can remove a rule on the editing page.

Page

205

of 240

Summary of Contents for DIR-815

















































































































































































































































Search results

Summary of Contents for DIR-815

Reviews:

Related manuals for DIR-815

Brands by name

Popular brands

D-Link DIR-815, User Manual

Search results

Summary of Contents for DIR-815

Reviews:

Related manuals for DIR-815

Brands by name

Popular brands