manualshive.com logo in svg

D-Link DIR-815, User Manual

The D-Link DIR-815 is a high-performance wireless router that ensures fast and reliable internet connection. To quickly set it up, you can download the free Quick Installation Manual from our website, providing step-by-step instructions for a hassle-free installation process. Enjoy seamless connectivity with this incredible router!

Share
Download
background image

DIR-815

  AC1200   Wave   2   MU-MIMO   Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

Parameter

Description

Identifier value

Specify the local host identifier.

Pre-shared key

A key for mutual authentication of the parties.

Interface

Select a WAN connection through which the tunnel will pass. When 
the  

Automatic

  value is selected, the router uses the default WAN 

connection.

NAT Traversal

The NAT Traversal function allows VPN traffic to pass through the 
NAT-enabled router.
Select the 

Disabled

 value to disable the function

.

Select the 

Enabled

 value to enable the function if it is supported by a 

remote host.
Select the 

Force

 value to make the function be always on, even if it is 

not supported by a remote host.

Exchange mode

Select the mode of negotiation from the drop-down list:

•

Main:

  The  mode   provides   the   most   secure   communication 

between   the   parties   in   the   course   of   negotiation   of   the 
authentication procedures.

•

Base:

  The   draft   negotiation   mode   with   preliminary 

authentication of a host.

•

Aggressive:

  The  mode provides faster operation as it skips 

several stages of negotiation of the authentication procedures.

Enable DPD

Move the switch to the right to enable using DPD protocol for this 
tunnel.  Such a setting allows  to check  the status  of a remote host: if 
encrypted packets exchange between the router and the remote host 
breaks down, the router starts sending  DPD messages to the remote 
host.  If the  switch is moved to to the left, the  

DPD delay

  and  

The 

maximum number of failures DPD

  fields  are  not available for 

editing.

DPD delay

A time period (in seconds) between attempts to check the status of a 
remote host. By default, the value 

5

 is specified.

The maximum 

number of failures 

DPD

A number of DPD messages that were sent to  check the status of a 
remote host and left unanswered. By default, the value 

3

 is specified. 

If a remote host does not answer the specified number of messages, 
the router breaks down the tunnel connection, removes the encryption 
keys, and tries to activate the connection.

Page 

198

 of 240

Summary of Contents for DIR-815

















































































































































































































































Reviews:

No comments

Related manuals for DIR-815

D-Link ShareCenter Quattro DNS-345 Quick Install Manual preview
ShareCenter Quattro DNS-345
Brand: D-Link Pages: 40
D-Link ShareCenter Quattro DNS-345 Datasheet preview
ShareCenter Quattro DNS-345
Brand: D-Link Pages: 4
D-Link ShareCenter DNS-343 Quick Install Manual preview
ShareCenter DNS-343
Brand: D-Link Pages: 12
D-Link AirPlus G DWL-G710 Troubleshooting preview
AirPlus G DWL-G710
Brand: D-Link Pages: 5
D-Link MYDLINK DNR-322L Datasheet preview
MYDLINK DNR-322L
Brand: D-Link Pages: 4
D-Link mydlink DNR-312L Quick Install Manual preview
mydlink DNR-312L
Brand: D-Link Pages: 8
D-Link AC750 Quick Install Manual preview
AC750
Brand: D-Link Pages: 12
D-Link DNS-722-4 Quick Install Manual preview
DNS-722-4
Brand: D-Link Pages: 16
D-Link DNS-722-4 User Manual preview
DNS-722-4
Brand: D-Link Pages: 88
D-Link DSL-2730B Technical Support preview
DSL-2730B
Brand: D-Link Pages: 5
D-Link GO-SW-5E Quick Install Manual preview
GO-SW-5E
Brand: D-Link Pages: 2
H3C RA100 Installation Manual preview
RA100
Brand: H3C Pages: 34
Eaton INDGW-X2 Manual preview
INDGW-X2
Brand: Eaton Pages: 10
Hawking CF100W Specifications preview
CF100W
Brand: Hawking Pages: 2
Ruckus Wireless ZoneFlex 7731 Getting Started Manual preview
ZoneFlex 7731
Brand: Ruckus Wireless Pages: 56
Teac HD-35NAS User Manual preview
HD-35NAS
Brand: Teac Pages: 20
Maple Systems cMT-FHDX Series Installation Instruction preview
cMT-FHDX Series
Brand: Maple Systems Pages: 2
NETGEAR Powerline 100 Installation Manual preview
Powerline 100
Brand: NETGEAR Pages: 2

Brands by name

Popular brands

Load more brands