DIR-815
AC1200 Wave 2 MU-MIMO Wi-Fi
Router with 3G/LTE Support and USB Port
User Manual
Configuring via Web-based Interface
You can specify the following parameters:
Parameter
Description
Name
A name for the VLAN for easier identification.
Enable
Move the switch to the right to allow using this VLAN.
Type
The type of the VLAN.
•
Untagged NAT
: The VLAN of this type is an external
connection with address translation. It is mostly used to
transmit untagged traffic.
When this value is selected, the
VLAN ID
field and the
Tagged Ports
section are not
displayed. Only one VLAN of this type can exist in the
system.
•
Tagged NAT
: The VLAN of this type is an external
connection with address translation. It is mostly used to
connect to the Internet. Later the network which identifier is
specified in the
VLAN ID
field is used as an interface to
create a WAN connection (on the
Connections Setup /
WAN
page).
When this value is selected, the
Untagged
Ports
section is not displayed.
•
Bridge
: The VLAN of this type is a transparent connection
between an internal port and an external connection. It is
mostly used to connect IPTV set-top boxes.
VLAN ID
An identifier of the VLAN.
Untagged Ports
The section includes the ports and Wi-Fi networks that can be added
to the VLAN.
To add an element, select the checkbox located to the left of it.
To remove an element, deselect the checkbox located to the left
of it.
Tagged Ports
Select an available value to assign it to this VLAN. To do this, select
the checkbox located to the left of the relevant port.
Click the
APPLY
button.
To edit an existing VLAN, select the relevant line in the table. On the page displayed, change the
parameters and click the
APPLY
button.
To remove an existing VLAN, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
).
Page
175
of 240
