D-Link DIR-815 Page 112 User Manual Download

Page: 112 / 240

DIR-815

AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

LAN

To configure the router's local interface, go to the

Connections Setup / LAN

page.

IPv4

Go to the

IPv4

tab to change IPv4 address, configure the built-in DHCP server, or specify MAC

address and IPv4 address pairs.

Figure 89. Configuring the local interface. The

IPv4

tab. The

Local IP Address

section.

Parameter

Description

Local IP Address

Mode of local IP

address assignment

Available if the

Access point

Repeater

, or

Client

mode was

selected in the Initial Configuration Wizard.

Select the needed value from the drop-down list.

•

Static

: The IPv4 address, subnet mask, and the gateway IP

address are assigned manually.

•

Dynamic

: The router automatically obtains these

parameters from the LAN DHCP server or from the router to
which it connects.

IP address

The IPv4 address of the router in the local subnet. By default, the
following value is specified:

192.168.0.1

Mask

The mask of the local subnet. By default, the following value is
specified:

255.255.255.0

Gateway IP address

Available if the

Access point

Repeater

, or

Client

mode was

selected in the Initial Configuration Wizard.

The gateway IPv4 address which is used by the router to connect to
the Internet (e.g., for synchronizing the system time with an NTP
server).

Optional

Hostname

The name of the device assigned to its IP address in the local subnet.

Page

112

of 240

Summary of Contents for DIR-815

















































































































































































































































Search results

Summary of Contents for DIR-815

Reviews:

Related manuals for DIR-815

Brands by name

Popular brands

D-Link DIR-815, User Manual

Search results

Summary of Contents for DIR-815

Reviews:

Related manuals for DIR-815

Brands by name

Popular brands