D-Link DIR-815 Page 171 User Manual Download

Page: 171 / 240

DIR-815

AC1200 Wave 2 MU-MIMO Wi-Fi

Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

PIN

On the

USB Modem / PIN

page, you can change the PIN code of the SIM card inserted into your

USB modem, disable or enable the check of the PIN code.

The operations presented on this page are unavailable for some models of USB modems.

The current state of the SIM card inserted into your USB modem is displayed in the

Status

field. If

the PIN code is entered incorrectly or the PIN code is not entered when the PIN code check is
enabled, the

Device is locked

value is displayed in the

Status

field. If the PIN code is entered

correctly or the PIN check is disabled, the

Device is unlocked

value is displayed in the

Status

field.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the

Yes

value is displayed in the

PIN code request

field. If the PIN check is disabled, the

value is

displayed in the

PIN code request

field.

Figure 132. The

USB Modem / PIN

page.

To disable the PIN code check, in the

PIN Code Request

section, enter the current PIN code in

the

PIN code

field and click the

DISABLE

button (the button is displayed if the PIN code check is

enabled).
To enable the PIN code check, in the

PIN Code Request

section, enter the PIN code used before

disabling the check in the

PIN code

field and click the

ENABLE

button (the button is displayed if

the PIN code check is disabled).
To change the PIN code, in the

Changing PIN Code

section, enter the current code in the

PIN

code

field, then enter a new code in the

New PIN code

and

New PIN code confirmation

fields and click the

SAVE

button.

Page

171

of 240

Summary of Contents for DIR-815

















































































































































































































































Search results

Summary of Contents for DIR-815

Reviews:

Related manuals for DIR-815

Brands by name

Popular brands

D-Link DIR-815, User Manual

Search results

Summary of Contents for DIR-815

Reviews:

Related manuals for DIR-815

Brands by name

Popular brands