DIR-320NRU
Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Wi-Fi
In this menu you can specify all needed settings for your wireless network.
Common settings
On the
Wi-Fi / Common settings
page, you can enable your wireless local area network
(WLAN) and split it into parts.
Figure 80. Common settings of the wireless LAN.
The
Enable Wireless
checkbox enables Wi-Fi connections. By default, the checkbox is selected.
If you want to disable your WLAN, deselect the
Enable Wireless
checkbox.
The router allows splitting your WLAN into several parts (up to four) with their own names
(SSIDs) and unique identifiers (BSSIDs). To split the network into several parts, select a relevant
value (
2
,
3
, or
4
) from the
MBSSID
drop-down list. By default, the wireless network is not splitted
(the
Disabled
value is selected from the list).
The value from the
BSSID
drop-down list is the unique identifier for your Wi-Fi network. You
cannot change the value of this parameter, it is determined in the device's internal settings.
If you have splitted your WLAN into parts, the
BSSID
drop-down list contains several values.
Each identifier corresponds to a single part of the WLAN.
For every part of the WLAN you can specify a name (SSID), security settings, rules for MAC
filtering, and enable the WMM function (if needed). To specify these values, select the needed part
from the
BSSID
drop-down list and click the
Change
button. Then proceed to the relevant page of
the
Wi-Fi
menu section.
Page
98
of 156
