DIR-320NRU
Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
MAC
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the
Clone MAC
button to set the MAC address of
the network interface card (of the computer that is being used to
configure the router at the moment) as the MAC address of the
WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list located to the right of the field (the field will be
filled in automatically).
Figure 70. The page for creating a new connection. The
IP
and
Miscellaneous
sections.
Parameter
Description
IP
IP Address
Enter an IP address for this WAN connection.
Netmask
Enter a subnet mask for this WAN connection.
Gateway IP address
Enter an IP address of the gateway used by this WAN connection.
Primary DNS server/
Secondary DNS server
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Miscellaneous
Enable RIP
Select the checkbox to allow using RIP for this connection.
Page
82
of 156
