DIR-320NRU
Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Dynamic IP Connection
Figure 34. Configuring Dynamic IP WAN connection.
In the
Name
field, specify a name for the connection for easier identification and click the
Next
button.
Figure 35. Configuring Dynamic IP WAN connection.
If needed, in the
MTU
field, change t
he maximum size of units transmitted by the interface.
If your ISP uses MAC address binding, in the
MAC
field,
enter the MAC address registered by your
ISP upon concluding the agreement.
You can click the
Clone MAC
button to set the MAC address of the network interface card (of the
computer that is being used to configure the router at the moment).
Also you can set the address of a device connected to the router's LAN at the moment. To do this,
select the relevant value from the drop-down list located to the right of the field (the field will be
filled in automatically).
Page
45
of 156
