DIR-320NRU
Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Installation and Connection
Saving and Restoring Settings
!
Note that you should regularly save the changes of the router's settings to the non-
volatile memory.
The router's web-based interface displays the notification on unsaved changes at the top of the page.
Figure 21. The notification on unsaved changes.
You can save the router's settings via the top-page menu displayed when the mouse pointer is over
the
System
caption.
Figure 22. The top-page menu.
Click the
Reboot
line if you have already saved the router's settings.
Click the
Save&Reboot
line to save new settings and immediately reboot the router.
Click the
Save
line to save new settings to the non-volatile memory and continue configuring the
device. Also you can save the device's parameters via the
Save
button on the
System /
Configuration
page.
Click the
Backup
line and follow the dialog box appeared to save the configuration (all settings of
the router) to your PC. Also you can save the router's configuration to your PC via the
Backup
button on the
System / Configuration
page.
Click the
Factory
line to restore the factory default settings. Also you can restore the factory
defaults via the
Factory
button on the
System / Configuration
page.
Also you can restore the factory default settings via the hardware
RESET
button. The button is
located on the back panel of the router next to the power connector.
To restore the factory default settings, insert a small paperclip into the hole of the button (with the
router
powered on
), push, and hold for 10 seconds. Then remove the paperclip. All LEDs of the
router should turn off and then turn on again.
Wait for about 30 seconds. Now you can access the web-based interface of the router using the
default IP address, username and password.
If you fail to restore the factory defaults via the method described above, use the emergency reset
method.
Page
34
of 156
