DIR-320NRU
Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
To activate the WPS function, select the
WPS Enable
checkbox and click the
Change
button.
When the checkbox is selected, the
Information
and
Connection
sections are available on the
page.
Parameter
Description
Default PIN code
The PIN code of the router. This parameter is used when connecting
the router to a registrar to set the parameters of the WPS function.
WPS Status
The state of the WPS function:
•
Configured
(all needed settings are specified)
•
Unconfigured
(you need to specify the relevant settings).
SSID
The name of the router's WLAN (or the first part of the WLAN if the
network is splitted into parts).
Network Authentication
The network authentication type specified for the WLAN (or the first
part of the WLAN).
Encryption
The encryption type specified for the WLAN (or the first part of the
WLAN).
Encryption key
The encryption key specified for the WLAN (or the first part of the
WLAN).
Refresh
Click the button to refresh the data on the page.
Reset to unconfigured
Click the button to reset the parameters of the WPS function.
WPS Method
A method of the WPS function. Select a value from the drop-down
list.
PIN
: Connecting the device via the PIN code.
PBC
: Connecting the device via the push button (actual or virtual).
PIN Code
The PIN code of the WPS-enabled device that needs to be connected
to the wireless network of the router.
The field is displayed only when the
PIN
value is selected from the
WPS Method
drop-down list.
Connect
Click the button to connect the wireless device to the router's WLAN
via the WPS function.
Page
109
of 156
