DIR-320NRU
Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Installation and Connection
Connecting to Web-based Interface
When you have configured your computer, you can access the web-based interface and configure
needed parameters (create a WAN connection, change the parameters of the wireless network,
specify the settings of the firewall, etc.).
1. Start a web browser (see the
Before You Begin
section, page 16).
2. In the address bar of the web browser, enter the IP address of the router (by default, the
following IP address is specified:
192.168.0.1
). Press the
Enter
key.
Figure 15. Connecting to the web-based interface of the DIR-320NRU device.
3. On the opened page, enter the username (login) and password for the administrator account
(by default, the following username and password are specified:
admin
,
admin
). Then
click the
Enter
link.
Figure 16. The login page.
!
If the error “
The page cannot be displayed
” (or “
Unable to display the page
”/“
Could not
connect to remote server
”) occurs upon connecting to the web-based interface of the router,
make sure that you have properly connected the router to your computer.
Right after the first access to the web-based interface you are forwarded to the page for changing
the administrator password specified by default.
Page
30
of 156
