85
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 8
Click
Apply
. When prompted, click
Continue
. Once the screen refreshes, unplug the
power to the D-Link router.
Step 9
Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem has established
a link to your ISP, plug the power back into the D-Link router. Wait about 30 seconds and log back
into the router.
Step 10
Click on the
Status
tab in the web configuration where you can view the device info.
Under
WAN
, click
Connect
. Click
Continue
when prompted. You should now see that the device
info will show an IP Address, verifying that the device has connected to a server and has been
assigned an IP Address.
How can I setup my router to work with Earthlink DSL or any PPPoE connection?
(continued)
Can I use my D-Link Broadband Router to share my Internet connection
provided by AOL DSL Plus?
In most cases yes. AOL DSL+ may use PPPoE for authentication bypassing the client software.
If this is the case, then our routers will work with this service. Please contact AOL if you are not
sure.
To set up your router:
Step 1
Log into the web-based configuration (192.168.0.1) and configure the WAN side to use
PPPoE.
Step 2
Enter your screen name followed by @aol.com for the user name. Enter your AOL
password in the password box.
Step 3
You will have to set the MTU to 1400. AOL DSL does not allow for anything higher than
1400.
Step 4
Apply settings.
Step 5
Recycle the power to the modem for 1 minute and then recycle power to the router. Allow 1
to 2 minutes to connect.
If you connect to the Internet with a different internet service provider and want to use the AOL
software, you can do that without configuring the router’s firewall settings. You need to configure
the AOL software to connect using TCP/IP.
Go to
http://www.aol.com
for more specific configuration information of their software.
Summary of Contents for DI-624S - AirPlus Xtreme G Wireless 108G USB Storage...
Page 1: ......
