84
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How can I setup my router to work with Earthlink DSL or any PPPoE connection?
Make sure you disable or uninstall any PPPoE software such as WinPoet or Enternet 300 from your
computer or you will not be able to connect to the Internet.
Step 1
Upgrade Firmware if needed.
(Please visit the D-Link tech support website at:
http://support.dlink.com
for the latest firmware
upgrade information.)
Step 2
Take a paperclip and perform a hard reset. With the unit on, use a paperclip and hold down
the reset button on the back of the unit for 10 seconds. Release it and the router will recycle, the
lights will blink, and then stabilize.
Step 3
After the router stabilizes, open your browser and enter 192.168.0.1 into the address window
and hit the
Enter
key. When the password dialog box appears, enter the username
admin
and leave
the password blank. Click
OK
.
If the password dialog box does not come up repeat
Step 2
.
Note:
Do not run Wizard.
Step 4
Click on the
WAN
tab on left-hand side of the screen. Select
PPPoE
.
Step 5
Select
Dynamic PPPoE
(unless your ISP supplied you with a static IP Address).
Step 6
In the username field enter
and your password, where
username is your own username.
For SBC Global users, enter
.
For Ameritech users, enter
.
For BellSouth users, enter
.
For Mindspring users, enter
For most other ISPs, enter
username
.
Step 7
Maximum Idle Time
should be set to zero. Set
MTU
to 1492, unless specified by your ISP,
and set
Autoreconnect
to
Enabled
.
Note:
If you experience problems accessing certain websites and/or email issues, please set the
MTU to a lower number such as 1472, 1452, etc. Contact your ISP for more information and the
proper MTU setting for your connection.
Summary of Contents for DI-624S - AirPlus Xtreme G Wireless 108G USB Storage...
Page 1: ......
