D-Link DI-624S - AirPlus Xtreme G Wireless 108G USB Storage..., Manual

Page: 92 / 106

92
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How can I use eDonkey behind my D-Link Router?
Step 4 Click Apply and then Continue .
You must open ports on your router to allow incoming traffic while using
eDonkey.
eDonkey uses three ports (4 if using CLI):
4661 (TCP) To connect with a server
4662 (TCP) To connect with other clients
4665 (UDP) To communicate with servers other than the one you are connected to. 4663
(TCP) *Used with the command line (CLI) client when it is configured to allow remote
connections. This is the case when using a Graphical Interface (such as the Java Interface)
with the client.
Step 1 Open your web browser and enter the IP Address of your router (192.168.0.1).
Enter username (admin) and your password (leave blank).
Step 2 Click on Advanced and then click Firewall .
Step 3 Create a new firewall
rule:
Click Enabled .
Enter a name (edonkey).
Click Allow .
Next to Source, select WAN
under interface. In the first
box, enter an * . Leave the
second box empty.
Next to Destination, select
LAN under interface. Enter
the IP Address of the
computer you are running
eDonkey from. Leave the
second box empty. Under
Protocol, select * . In the port
range boxes, enter 4661 in
the first box and then 4665 in
the second box. Click Always
or set a schedule.