DGS-8000 Series Hardware Installation Guide Chapter 1 Product Overview
11
1.3.4
Power system
DGS-8000 series Ethernet switch uses the AC power input. Currently the 8000-1400AC and
8000-2000AC power modules are provided for this switch. The two power modules support
the power management. The management engine of DGS-8000 can read the power
information and realize the flexible and intelligent management for the whole switch’s power
through the power management policy. The technical specifications of
8000-1400AC/8000-2000AC module are shown below:
AC input:
Rated voltage range: 100~120V~, 200-240V~; 50/60Hz
Maximum voltage range: 90~264V~; 47~63Hz
Maximum output power: 8000-1400AC: 90~176V~ Power:530W
176~264V~ Power:1400W
8000-2000AC: 90~176V~ Power:1080W
176~264V~ Power:2000W
Note
DGS-8006/8010 series switch supports the 1+1 redundancy of power supply.
In order to improve the stability and reliability for the overall system’s
operation, you are recommended to configure the 1+1 redundancy for the
power module of DGS-8006/8010.
1.3.5
Heat Dissipation System
The operating temperature of DGS-8000 is 0 to 50°C. The thermal design must ensure that
the switch works at such an ambient temperature for high reliability, security, and reparability.
According to the thermal design of DGS-8000, fans are used to induct air for a forced
convection in order to ensure that the equipment works in the specified environment well.
Figure 1-7 and Figure 1-8 show the flow scheme of heat dissipation of DGS-8006/8010,
respectively.
Summary of Contents for dgs-8000 SERIES
Page 1: ...DGS 8000 Hardware Installation Guide ...
Page 97: ......