D-Link DGS-3024, Manual

Page: 154 / 208

DGS-3024 Gigabit Ethernet Switch Manual
Reboot Services
Reboot
The following window is used to restart the Switch.
All of the configuration information entered from the last time Save Changes was executed will be lost. Click the Reboot button
to restart the Switch.
Figure 11- 8. Restart System window
Reset
The Reset function has several options when resetting the Switch. Some of the current configuration parameters can be retained
while resetting all other configuration parameters to their factory defaults.
NOTE: Only the Reset System option will enter the factory default
parameters into the Switch's non-volatile RAM, and then restart the
Switch. All other options enter the factory defaults into the current
configuration, but do not save this configuration. Reset System will return
the Switch's configuration to the state it was when it left the factory
Reset gives the option of retaining the Switch's User Accounts and History Log while resetting all other configuration parameters
to their factory defaults. If the Switch is reset using this window, and
Save Changes is not executed, the Switch will return to the
last saved configuration when rebooted.
Figure 11- 9. Reset window
140