manualshive.com logo in svg

D-Link DGS-3024, Manual

The D-Link DGS-3024 is a cutting-edge networking switch that delivers high-performance connectivity for businesses. Unlock the full potential of this device by downloading the free User Manual from manualshive.com. Explore advanced features and configure your network effortlessly with this comprehensive and easy-to-read manual.

Share
Download
background image

DGS-3024 Gigabit Ethernet Switch Manual

 

Leave both the User Name field and the Password

 

field blank and click 

OK

. This will open the Web-based user interface. The 

Switch management features available in the Web-based manager are explained below. 

Web-based User Interface 

The user interface provides access to various Switch configuration and management windows, allows you to view performance 
statistics, and permits you to graphically monitor the system status. 

Areas of the User Interface 

The figure below shows the user interface. The user interface is divided into three distinct areas as described in the table. 

 

  Area 2

  Area 3 

 Area 1 

Figure 6- 3.  Main Web-Manager window 

   Area                 Function 

Area 1 

Select the folder or window to be displayed. The folder icons can be opened to display the hyper-
linked menu buttons and subfolders contained within them.  

Area 2 

Presents a graphical near real-time image of the front panel of the Switch. This area displays the 
Switch's ports and expansion modules, showing port activity, duplex mode, or flow control, 
depending on the specified mode. Various areas of the graphic can be selected for performing 
management functions, including port configuration. 

Area 3 

Presents Switch information based on your selection and the entry of configuration data. 

 

  

 

NOTICE

: Any changes made to the Switch configuration during the 

current session must be saved in the 

Save Configuration

 window 

(

Maintenance

 

→

 

Save Changes

) or use the command line interface (CLI) 

command save. 

 

 

NOTE

: Be sure to configure the user name and password in the 

User 

Account Management

 window (

Management

 

→

 

User Accounts

) before 

connecting the Switch to the greater network. 

 

 

 

       

 

 

      

 

19 

Summary of Contents for DGS-3024

















































































































































































































Reviews:

No comments

Related manuals for DGS-3024

BSS Audio EC-4B Installation Manual preview
EC-4B
Brand: BSS Audio Pages: 20
Banner Sure Cross DX70 Instruction Manual preview
Sure Cross DX70
Brand: Banner Pages: 35
Navini Networks RIPWAVE 40-00460-00R User Manual preview
RIPWAVE 40-00460-00R
Brand: Navini Networks Pages: 35
AMX NXA-ENET8POE Installation Manual preview
NXA-ENET8POE
Brand: AMX Pages: 2
Divio SRA311-008P8 Series Installation Manual preview
SRA311-008P8 Series
Brand: Divio Pages: 4
Z-Com ZCN-1523H-5-16 Quick Installation Manual preview
ZCN-1523H-5-16
Brand: Z-Com Pages: 18
Comet Labs GS8+ User Manual preview
GS8+
Brand: Comet Labs Pages: 11
Top RAMS1000 User Manual preview
RAMS1000
Brand: Top Pages: 21
CNC-Step AceroDURO 100/S100 Operating Instructions Manual preview
AceroDURO 100/S100
Brand: CNC-Step Pages: 86
Linksys WRK54G User Manual preview
WRK54G
Brand: Linksys Pages: 80
Sans Digital Mobileraid MR8X Detailed User'S Manual preview
Mobileraid MR8X
Brand: Sans Digital Pages: 81
LevelOne GSW-0890 Quick Installation Manual preview
GSW-0890
Brand: LevelOne Pages: 4
IBM Redbooks Emulex VFA5 Product Manual preview
Redbooks Emulex VFA5
Brand: IBM Pages: 15
Williams Sound DW SY 1 User Manual preview
DW SY 1
Brand: Williams Sound Pages: 2
GarrettCom DynaStar DS2000-IFR Installation And Maintenance Manual preview
DynaStar DS2000-IFR
Brand: GarrettCom Pages: 40
National Datacomm 9210S01 User Manual preview
9210S01
Brand: National Datacomm Pages: 62
Data-Tronix DT-ATSC-IP-8 User Manual & Installation Manual preview
DT-ATSC-IP-8
Brand: Data-Tronix Pages: 15
Epson USB User Manual preview
USB
Brand: Epson Pages: 8

Brands by name

Popular brands

Load more brands