manualshive.com logo in svg

D-Link DGS-3024, Manual

The D-Link DGS-3024 is a cutting-edge networking switch that delivers high-performance connectivity for businesses. Unlock the full potential of this device by downloading the free User Manual from manualshive.com. Explore advanced features and configure your network effortlessly with this comprehensive and easy-to-read manual.

Share
Download
background image

DGS-3024 Gigabit Ethernet Switch Manual

 

Switch Information 

This window is used to enter name, location, and contact information. Click 

Apply

 to activate the new settings. 

 

Figure 7- 2.  Switch Information (Basic Settings) window 

The information is described as follows: 

Parameter 

       

Description 

Device Type 

A description of the Switch type. 

MAC Address  

The Ethernet address for the device. Also known as the physical address. 

Boot PROM Version 

Version number for the firmware chip. This information is needed for new runtime software 
downloads. 

Firmware Version 

Version number of the firmware installed on the Switch. This can be updated by using the 

Download Firmware from TFTP Server

 window in the 

TFTP Services

 folder (

Maintenance

 

> 

TFTP Services 

> 

Download Firmware from TFTP Server

). 

Hardware Version 

Version of the Switch hardware. 

System Name 

A user-assigned name for the Switch. 

System Location 

A user-assigned description for the physical location of the Switch. 

System Contact 

Name of the person to contact should there be any problems or questions with the system. 
Users may also want to include a phone number or extension. 

 

 

 

23 

Summary of Contents for DGS-3024

















































































































































































































Reviews:

No comments

Related manuals for DGS-3024

Ubiquiti airFiber AF-5X User Manual preview
airFiber AF-5X
Brand: Ubiquiti Pages: 50
ADTRAN 617600026F1 Quick Start Manual preview
617600026F1
Brand: ADTRAN Pages: 9
ForeScout CounterACT Quick Installation Manual preview
CounterACT
Brand: ForeScout Pages: 28
Enterasys X-Pedition 2000 Getting Started Manual preview
X-Pedition 2000
Brand: Enterasys Pages: 86
ETL TeleCLIENT TC7730 Series User Manual preview
TeleCLIENT TC7730 Series
Brand: ETL Pages: 83
Idis DR-6308P Quick Manual preview
DR-6308P
Brand: Idis Pages: 20
Ubiquiti UniFi LED ULED-AT Quick Start Manual preview
UniFi LED ULED-AT
Brand: Ubiquiti Pages: 16
Sierra Wireless AirCard 750 Installation preview
AirCard 750
Brand: Sierra Wireless Pages: 2
Cyclades AlterPath Manager 2500 Installation, Configuration And User Manual preview
AlterPath Manager 2500
Brand: Cyclades Pages: 368
Atlantis WebShare 141 WN Quick Start Manual preview
WebShare 141 WN
Brand: Atlantis Pages: 78
Paradyne Hotwire 5620 RTU Installation Instructions Manual preview
Hotwire 5620 RTU
Brand: Paradyne Pages: 20
ZyXEL Communications P-660R-F1 series User Manual preview
P-660R-F1 series
Brand: ZyXEL Communications Pages: 268
Ubiquiti Amplifi AFi-LR Quick Start Manual preview
Amplifi AFi-LR
Brand: Ubiquiti Pages: 32
Western Digital Passport WDXML1000UE Product Specifications preview
Passport WDXML1000UE
Brand: Western Digital Pages: 2
Lanner ICS-I372 User Manual preview
ICS-I372
Brand: Lanner Pages: 80
Lanner NCA-5540 User Manual preview
NCA-5540
Brand: Lanner Pages: 116
Tripp Lite N306-04M Specification Sheet preview
N306-04M
Brand: Tripp Lite Pages: 2
Billion BiPAC 7820NZ User Manual preview
BiPAC 7820NZ
Brand: Billion Pages: 100

Brands by name

Popular brands

Load more brands