9
Connecting the Network Cable
Category 3, 4 or 5 UTP cable can be used to make the Ethernet connection to
your router.
The maximum cable length between the DG-102SH and the supporting call
agent is 100 meters. The cable must be straight-through (not a
crossover
cable)
with RJ-45 connectors at each end.
Connecting the VoIP Gateway to a Hub/Switch
Connecting the VoIP Gateway to a Computer
The DG-102SH requires a straight-through cable when connecting to a
computer. Make sure that your IP address on your Ethernet card is in the same
subnet as the DG-102SH otherwise it will not connect.
To connect the device to either a hub or switch, you must connect the straight-
through cable to the LAN port.
Getting Started
Installation
When installing the unit on a desktop or shelf, the rubber feet in-
cluded with the device should be attached. These cushioning feet
should be attached to the bottom corners of the device.
Do not place heavy objects on the DG-102SH at any time. Placing
the DG-102SH in a well ventilated area is very important. Not doing
so may cause damage to the unit.
