manualshive.com logo in svg

D-Link DG-102SH, Manual, Page: 72 / 83

Share
Download
D-Link DG-102SH Manual Download Page 72

72

Command Line Interface

General Setup Commands

nwdbg tftp

 <0|1>

Definition:

This command sets the software download link to either
a WAN link or a LAN link. If only 

nwdbg tftp 

is typed, this

command shows the download link.

Parameter(s):

<0:WAN link, 1:LAN link>

Example:

nwdbg tftp 0

nwdbg dns

 <DNS IP>

Definition:

This command sets the Domain Name Server’s IP address. If
only 

nwdbg dns 

is typed, this command shows the DNS IP/

STATE.

Parameter(s):

<DNS IP>

Example:

nwdbg dns 10.1.1.5

nwdbg dns

 <disable|enable>

Definition:

This command turns on/off the DNS function. If only

nwdbg dns 

is typed, this command shows the DNS

IP/STATE.

Parameter(s):

[disable | enable]

Example:

nwdbg dns disable

nwdbg country

  <code>

Definition:

This command provides country code setting interface
to config the tone frequency for different country. If only

nwdbg country 

is typed, this command shows the

COUNTRY CODE.

Parameter(s):

<0:USA (Default), 1:Japan, 2:Hong Kong, 3:Sweden>

Example:

nwdbg country 1

Summary of Contents for DG-102SH




















































































Reviews:

No comments