D-Link DG-102SH Manual Download Page 64

Page: 64 / 83

Using the Boot Menu

Device Information

Update Firmware and Configuration Files

New software can be downloaded from a TFTP server.

Use the <Tab> key to highlight the third menu item on the Boot Menu, Update
Firmware and Configuration Files, and press <Enter>. The

Update Boot and

Application

screen will be displayed:

Boot Menu—Update Firmware and Configuration Files screen

System Country Code:

This is a user-defined country code for this

device. < 0:USA, 1:Japan (Default), 2:Hong Kong, 3:Sweden >

System Name:

This is a user-defined name for this device.

System Location:

This is a user-defined physical location of the

device.

System Contact:

This is user-defined contact information for the

person or department responsible for the maintenance of this device.

Lifeline State:

Enables or disables the Lifeline function

Lifeline Prefix:

This is a user-defined Lifeline prefixed key for this

device. (Default is “#” key)

Summary of Contents for DG-102SH




















































































Search results

Summary of Contents for DG-102SH

Reviews:

Related manuals for DG-102SH

Brands by name

Popular brands

D-Link DG-102SH, Manual

Search results

Summary of Contents for DG-102SH

Reviews:

Related manuals for DG-102SH

Brands by name

Popular brands