D-Link DFL-80 User Manual Download Page 77

Page: 77 / 147

DMZ To External & DMZ To Internal

This section describes steps to create policies for packets and services from
DMZ networks to External (WAN) networks. Please follow the same procedures
for DMZ networks to Internal (LAN) networks.

Entering the DMZ To External window:

Click

DMZ To External

under

Policy

menu and the

DMZ To External

table

appears displaying currently defined

DMZ To External

policies.

The fields in the DMZ To External window are:

Source:

source network addresses which are specified in the

DMZ

section of the

Address

window.

Destination:

destination networks, which is the external network

address

Service:

services supported by Servers of external networks.

Action:

control actions, to permit or deny packets from the DMZ

network to external networks travelling through the DFL-80.

Option:

specify the monitoring functions on packets from the

DMZ network to external networks travelling through the Firewall.

Configure:

modify settings or remove policies

Move:

this sets the priority of the policies, number 1 being the

highest priority.

Summary of Contents for DFL-80




















































































































































Search results

Summary of Contents for DFL-80

Reviews:

Related manuals for DFL-80

Brands by name

Popular brands

D-Link DFL-80, User Manual

Search results

Summary of Contents for DFL-80

Reviews:

Related manuals for DFL-80

Brands by name

Popular brands