D-Link DFL-80 User Manual Download Page 59

Page: 59 / 147

Adding Service Groups:

Step 1.

In the

Group

window, click the

New Entry

button.

In the

Add Service Group

window, the following fields will

appear:

Available Services:

List all the available services.

Selected Services:

List services to be assigned to the

new group.

Step 2.

Enter the new group name in the group

Name

field. This will be

the name referencing the created group.

Step

To add new services:

Select the services desired to be added

in the

Available Services

list and then click the

Add>>

button

to add them to the group.

Step

To remove services:

Select services desired to be removed

in the

Available Services

, and then click the

<<Remove

button

to remove them from the group.

Step

Click

to save the new group settings.

Summary of Contents for DFL-80




















































































































































Search results

Summary of Contents for DFL-80

Reviews:

Related manuals for DFL-80

Brands by name

Popular brands

D-Link DFL-80, User Manual

Search results

Summary of Contents for DFL-80

Reviews:

Related manuals for DFL-80

Brands by name

Popular brands