D-Link DFL-80 User Manual Download Page 14

Page: 14 / 147

Restoring Factory Default Settings:

Step

Select

Reset Factory Settings

under

Firewall Configuration

Step

Click

at the bottom-right of the screen to restore the factory

settings.

Enabling E-mail Alert Notification:

Step 1.

Select

Enable E-mail Alert Notification

under

E-Mail Settings

This function will enable the Firewall to send e-mail alerts to the
System Administrator when the network is being attacked by
intruders or when emergency conditions occur.

Step

SMTP Server IP:

Enter SMTP server’s IP address.

Step 3

E-Mail Address 1:

Enter the first e-mail address to receive the

alarm notification.

Step 4

E-Mail Address 2:

Enter the second e-mail address to receive the

alarm notification. (Optional)

Step

Click

on the bottom-right of the screen to enable E-mail alert

notification.

Summary of Contents for DFL-80




















































































































































Search results

Summary of Contents for DFL-80

Reviews:

D-Link DFL-80, User Manual, Page: 14 / 147

Search results

Summary of Contents for DFL-80

Reviews: