D-Link DFL-80 User Manual Download Page 47

Page: 47 / 147

Editing an External Group:

Step

In the

External Group

window, locate the network group to be

modified and click its corresponding

Modify

button in the

Configure

field.

Step 2.

A window displaying the information of the selected group
appears:

Available Address:

list the names of all the

members of the external network.
n

Selected Address:

list the names of the

members that have been assigned to this group.

Step

Add members:

Select the names to be added in the

Available

Address

list, and click the

Add>>

button to add them to the

Selected Address

list.

Step 4.

Remove members:

Select the names to be removed in the

Selected Address

list, and click the

<<Remove

button to

remove them from the

Selected Address

list.

Step 5.

Click

to save changes or click

Cancel

to discard changes.

Summary of Contents for DFL-80




















































































































































Search results

Summary of Contents for DFL-80

Reviews:

D-Link DFL-80, User Manual, Page: 47 / 147

Search results

Summary of Contents for DFL-80

Reviews: