72
Adding an Incoming Policy:
Step 1:
Under
Incoming
of the
Policy
menu, click the
New Entry
button.
Step 2:
Source Address:
Select names of the external networks from the drop down
list. The drop down list contains the names of all external networks defined in
the
External
section of the
Address
menu. To create a new source address,
please go to the
Internal
section under the
Address
menu.
Destination Address:
Select names of the internal networks from the drop
down list. The drop down list contains the names of IP mapping addresses
specified in the
Mapped IP
or the
Virtual Server
sections of
Virtual Server
menu. To create a new destination address, please go to the
Virtual Server
menu. (
Please refer to Chapter 8 for Virtual Server for details)
Service:
Specified services provided by internal network servers. These are
services/application that are allowed to pass from the External network to the
Internal network. Choose
ANY
for all services.
Action:
Select Permit or Deny from the drop down list to allow or reject the
packets travelling between the specified external network and Virtual Server/
Mapped IP.
Logging:
Select “Enable” to enable flow monitoring.
Statistics:
Select “Enable” to enable flow statistics.
Alarm Threshold:
Set a maximum flow rate (in Kbytes/Sec). An alert will be
sent if flow rates are higher than the specified value.
Step 3:
Click
OK
to add new policy or click
Cancel
to cancel adding new
incoming policy.