D-Link DFL-210 - NetDefend - Security Appliance, Log Reference Manual, Page: 66 / 476

Explanation An invalid command was received on the control channel. This is
allowed, but the command will be rejected as it is not understood.
Gateway Action rejecting_command
Recommended Action If unknown commands should not be allowed, modify the FTPALG
configuration.
Revision 1
Parameters peer
string
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.76. port_command_disabled (ID: 00200214)
Default Severity WARNING
Log Message FTPALG: PORT command not allowed from <peer>. Rejecting
command
Explanation The client tried to issue a "PORT" command, which is not valid since
the client is not allowed to do active FTP. The command will be
rejected.
Gateway Action rejecting_command
Recommended Action If the client should be allowed to do active FTP, modify the FTPALG
configuration.
Revision
1
Parameters peer
Context Parameters ALG Module Name
ALG Session ID
Connection
2.1.77. illegal_command (ID: 00200215)
Default Severity WARNING
Log Message FTPALG: Failed to parse PORT parameters from <peer>.
String=<string>. Closing connection
Explanation Invalid parameters to the "PORT" command were received. The
connection will be closed.
Gateway Action close
Recommended Action None.
Revision 1
Parameters peer
string
2.1.76. port_command_disabled (ID:
00200214) Chapter 2. Log Message Reference
66