D-Link DFL-210 - NetDefend - Security Appliance, Log Reference Manual, Page: 447 / 476

Revision 1
Context Parameters Rule Name
Packet Buffer
2.46.7. enet_hw_sender_multicast (ID: 04400416)
Default Severity WARNING
Log Message Ethernet hardware sender is a multicast address. Dropping.
Explanation The Ethernet hardware sender address is a multicast address. The
packet will be dropped.
Gateway Action drop
Recommended Action Investigate if there are equipment sending packets using a multicast
address as sender MAC address. If there are, try to change the
behaviour of that equipment.
Revision 1
Context Parameters Rule Name
Packet Buffer
2.46.8. relay_stp_frame (ID: 04400417)
Default Severity INFORMATIONAL
Log Message Relaying STP frame from <recvif> to switched interfaces
Explanation An incomming STP frame has been relayed to all switched interfaces
in the same switch route as [recif].
Gateway Action allow
Recommended Action None.
Revision 1
Parameters recvif
2.46.9. dropped_stp_frame (ID: 04400418)
Default Severity INFORMATIONAL
Log Message Dropping STP frame from <recvif>
Explanation An incomming STP frame has been dropped.
Gateway Action
drop
Recommended Action None.
Revision 1
Parameters recvif
2.46.7. enet_hw_sender_multicast (ID:
04400416) Chapter 2. Log Message Reference
447