D-Link DFL-210 - NetDefend - Security Appliance, Log Reference Manual, Page: 379 / 476

Log Message Maximum processing memory limit reached
Explanation The reassembly subsystem has reached the maximum limit set on its
processing memory. This will decrease the performance of connections
that are processed by the reassembly subsystem.
Gateway Action
drop
Recommended Action Consider increasing the setting Reassembly_MaxProcessingMem.
Revision 1
2.33.8. maximum_connections_limit_reached (ID:
04800010)
Default Severity
NOTICE
Log Message Maximum connections limit reached
Explanation The reassembly subsystem has reached the maximum number of
concurrent connections.
Gateway Action none
Recommended Action Consider increasing the setting Reassembly_MaxConnections.
Revision 1
Context Parameters Connection
2.33.9. state_memory_allocation_failed (ID: 04800011)
Default Severity ERROR
Log Message Failed to allocate the memory needed to activate reassembly on a
connection
Explanation The reassembly subsystem has failed to allocate the memory needed to
activate reassembly on a connection.
Gateway Action none
Recommended Action Review configuration to reduce memory consumption.
Revision 1
Context Parameters Connection
2.33.8. maximum_connections_limit_reached
(ID: 04800010) Chapter 2. Log Message Reference
379