D-Link DFL-210 - NetDefend - Security Appliance, Log Reference Manual, Page: 233 / 476

2.18. IDPPIPES
These log messages refer to the IDPPIPES (IDP Traffic Shaping events) category.
2.18.1. conn_idp_piped (ID: 06100001)
Default Severity WARNING
Log Message IDP Pipe event triggered. Throughput limited to <limit>
Explanation An IDP rule with Pipe event triggered on the specified connection. The
connection is piped to [limit] kbps.
Gateway Action limit_throughput
Recommended Action None.
Revision 1
Parameters limit
Context Parameters Connection
2.18.2. host_idp_piped (ID: 06100002)
Default Severity NOTICE
Log Message Dynamic pipe state added for host <host>. Throughput limited to
<limit> for all new connections for <ttl> seconds
Explanation An IDP Pipe event triggered. The host [host] will be dynamically
piped with a total throughput of [limit] kbps. All new connections to
and from this host will be piped for [ttl] seconds.
Gateway Action host_idp_piped
Recommended Action None.
Revision 1
Parameters host
limit
ttl
Context Parameters Connection
2.18.3. out_of_memory (ID: 06100003)
Default Severity ALERT
Log Message Out of memory
Explanation An attempt to allocate memory failed.
Gateway Action
host_state_creation_aborted
Recommended Action Issue the "memory" CLI command and check for modules with
2.18. IDPPIPES Chapter 2. Log Message Reference
233