D-Link DFL-210 - NetDefend - Security Appliance, Log Reference Manual, Page: 101 / 476

Parameters len
retrigs
Context Parameters ALG Module Name
ALG Session ID
2.1.170. max_tls_sessions_reached (ID: 00200450)
Default Severity WARNING
Log Message TLSALG: Maximum number of TLS sessions (<max_sessions>) for
service reached. Closing connection
Explanation The maximum number of concurrent TLS sessions has been reached
for this service. No more sessions can be opened before old sessions
have been released.
Gateway Action close
Recommended Action If the maximum number of TLS sessions is too low, increase it.
Revision 1
Parameters max_sessions
Context Parameters ALG Module Name
2.1.171. failed_create_new_session (ID: 00200451)
Default Severity WARNING
Log Message TLSALG: Failed to create new TLSALG session (out of memory)
Explanation An attempt to create a new TLSALG session failed, because the unit is
out of memory.
Gateway Action close
Recommended Action Decrease the maximum allowed TLSALG sessions, or try to free some
of the RAM used.
Revision 1
Context Parameters ALG Module Name
2.1.172. failure_connect_http_server (ID: 00200452)
Default Severity ERROR
Log Message TLSALG: Failed to connect to the HTTP Server. Closing connection.
ALG name: <algname>.
Explanation
The unit failed to connect to the HTTP Server, resulting in that the
ALG session could not be successfully opened.
Gateway Action close
2.1.170. max_tls_sessions_reached
(ID: 00200450) Chapter 2. Log Message Reference
101