D-Link DFL-210 - NetDefend - Security Appliance, Log Reference Manual, Page: 150 / 476

Default Severity NOTICE
Log Message ARP hw sender does not match Ethernet hw sender. Dropping
Explanation The hardware sender address specified in the ARP data does not match
the Ethernet hardware sender address. Dropping packet.
Gateway Action drop
Recommended Action If this is not the desired behaviour, modify the configuration.
Revision 1
Context Parameters Rule Name
Packet Buffer
2.4.8. hwaddr_change (ID: 00300008)
Default Severity NOTICE
Log Message <knownip> has a different address <newhw> compared to the known
hardware address <knownhw>. Allow packet for further processing.
Explanation A known dynamic ARP entry has a different hardware address than the
one in the ARP packet. Allowing packet for further processing.
Gateway Action allow_processing
Recommended Action If this is not the desired behaviour, modify the configuration.
Revision
1
Parameters knownip
knownhw
newhw
Context Parameters Rule Name
Packet Buffer
2.4.9. arp_cache_size_limit_reached (ID: 00300030)
Default Severity NOTICE
Log Message ARP cache size limit reached
Explanation The ARP cache size limit has been reached. Current license limit is
[limit].
Gateway Action None
Recommended Action Update your license to allow a greater amount of concurrent ARP
entries.
Revision 1
Parameters
limit
2.4.8. hwaddr_change (ID: 00300008) Chapter 2. Log Message Reference
150