D-Link DES-3528 - xStack Switch - Stackable, User Manual, Page: 84 / 322

xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
83
Subnet-based VLAN Settings
The subnet-based VLAN settings are used to create, find or delete a subnet-based VLAN entry. A subnet-based
VLAN entry is an IP subnet-based VLAN classification rule. If an untagged or priority-tagged IP packet is received on
a port, its source IP address will be used to match the subnet-based VLAN entries. If the source IP is in the subnet of
an entry, the packet will be classified to the VLAN defined for this subnet.
To view this window, click
L2 Features > Subnet VLAN > Subnet VLAN Settings
as shown below:
Figure 3 - 16 Subnet VLAN Settings window
The following parameters can be configured:
Parameter Description
VLAN Name
The VLAN Name to be associated with the subnet.
VLAN ID
The VLAN ID to be associated with the subnet.
Priority
The priority to be associated with the subnet. Its range is 0 - 7 .
IPv4 Network
Address
Is used to specify an IPv4 network address. The format is ipaddress/prefix length. The prefix
length of the IPv4 network address cannot be greater than 64.
Enter the appropriate information and click
Add
to create a new entry. To search for a particular entry enter the
appropriate information and click
Find
. To remove an entry click
Delete
. To view all entries on the Switch click
Show
All
. To remove all entries click
Delete All
.